SOLARFOCUS Therminator II, Руководство по эксплуатации

Страница: 30 / 44

14 mySOLARFOCUS app
14 mySOLARFOCUS app
Function: The mySOLARFOCUS app allows you to
use your smartphone to access specific control
eco
manager- touch
functions:
– Setting the room temperature and heating circuit
flow temperature, including heating times.
–
Hot water programs, with one-time hot water tank
loading.
– Display of the solar yield of your solar power sys-
tem.
i
Installation and configuration of this function
must be performed on site (i.e. not included in
the commissioning and service activities).
14.1 Requirements for use
– The software version of the control is ≥ V 15.090;
for thermi
nator
II touch.
–
The control must be connected to the internet.
–
Smartphone with Apple IOS 7.0 or Android OS 4.4
14.2 Connecting the control to the inter-
net
Create a connection between the router and the
boiler control panel (touch display)
Use the following socket (RJ45) on the rear of the dis-
play:
–
for boiler thermi
nator
II touch IF3 Ethernet
IP configuration
► To access the IP-VNC icon, select it in the control
–
Selection menu screen
– Customer menu screen
–
Trained qualified personnel button
► Enter the data for your router. Recommend pro-
cess:
– Select DHCP ON .
Ä The IP address is determined.
–
Select the DHCP OFF + Apply button .
Fig. 2-40_02-031
n
The IP address must be unique in each Ethernet
network and is dependent on the other network
components (PC, modem/router, etc).
n
It is recommended to set a fixed IP address
(=
DHCP OFF ), i.e. the control unit has a constant
IP address.
14.3 Register on the web server
The touch display must be registered on the
SOLARFOCUS Web server:
► Press the app button
Fig. 2-41_01-126-05
►
Continue by pressing Accept
Fig. 2-42_01_127
30 Operation manual therminator II touch