5 Use and operation
5.4.1 Required boiler values
Fig. 2-8_01_031b
External boiler release
2
On
switches the function to standby. I.e. a connected
external boiler may only start when it receives the
release from the SOLARFOCUS boiler (e.g. on the
basis of a lack of fuel, operating fault).
Additionally You can set whether the external boiler
can start at any time, or whether you want to restrict a
start to certain activation times.
5.4.2 Heat exchanger cleaning
Fig. 2-9_02-100a-sn
Release from-to
Within the release times, heat exchanger cleaning can
start. A release time from 00:00 to 24:00 means that
no restriction is pending and the functions can start at
any time.
5.4.3 User lock
Fig. 2-10_01-001th
The function serves as protection against unaut-
horised modification of the control parameters. When
the user lock is active, the parameters of the individual
screens are displayed but cannot be changed. The
active user lock is indicated by the padlock icon
1
in
the screens.
User lock screen
Fig. 2-11_02-003
Enter the password
2
To define a new password (maximum 20 characters).
Password
3
The currently valid password is displayed.
User lock
4
Off
: The user lock is switched off.
On
: Switches on the user lock function. If the display
is not touched for one minute, the user lock is active in
the screens.
Password reset
5
The current password is reset to the value
solarfocus
.
Accept as new password
6
Enter a new password in the input field and press the
button. Note on screen keyboard; Confirm input with
the
button.
Operation manual
therminator II touch
13
