SOLARFOCUS Therminator II, Руководство по эксплуатации

Страница: 15 / 44

5 Use and operation
IP configuration
►
To access the IP-VNC icon, select it in the control
– Selection menu screen
–
Customer menu screen
– Trained qualified personnel button
►
Enter the data for your router. Recommend pro-
cess:
–
Select DHCP ON .
Ä
The IP address is determined.
– Select the DHCP OFF + Apply button .
Fig. 2-15_02-031
n
The IP address must be unique in each Ethernet
network and is dependent on the other network
components (PC, modem/router, etc).
n
It is recommended to set a fixed IP address
(=
DHCP OFF ), i.e. the control unit has a constant
IP address.
Version 1: Installation of VNC viewer for access
from a local PC (PC in the home network)
n
Download the free VNC Viewer from the Internet,
install it on the PC and start the application.
n
Enter the previously defined IP address of the con-
trol.
–
As soon as the VNC Viewer is able to access
the control unit, a password must be entered.
– The password predefined by the manufacturer
is
solarfocus
–
After login, the screen view of the control unit is
available.
Changing the VNC password
Fig. 2-16_01-054
n
Press the Change VNC password button on the IP
setup view.
n
To change it, first enter the old password, then the
new password, then press the
Accept button.
n
The new password must be used to log on after
restarting the VNC Viewer on the local PC.
n
Press the Reset password button to reset the pass-
word to the default password solarfocus .
Version 2: Installation of VNC viewer for access
from an external PC (PC outside the home net-
work)
n
The user's local router does not always have the
same IP address on the Internet (it is allocated by
an
Internet Service Provider – ISP ).
n
Nevertheless, Dynamic Domain Name Systems,
also referred to as
DynDNS or DDNS , allows
access to the router.
n
These systems allow a unique host name to be
assigned on the Internet; the unique name is then
also entered in the router. If the router is then assi-
gned a different address by the ISP, it enters the
updated IP address as the defined host name on
the DynDNS server. The router and therefore the
home network can then be reached using this host
name.
n
To create a connection with the control unit, a port
diversion is required from the external port of the
router
[1]
to the IP address and to VNC port 5900 of
the control unit.
[1]Port 5950 is recommended
i
Avoid any port forwarding from external port
5900 of the router to IP address and VNC port
5900 of the control.
Operation manual therminator II touch 15