12 Solar system
12 Solar system
(optional additional function)
The solar yield is loaded into a solar tank. This tank
can be a buffer tank or a DHW tank.
Fig. 2-38_10-005
1 Collector temperature (measured at the col-
lector sensor)
2 Tank temperature bottom
3 Collector flow temperature
4 Collector return temperature
5 Solar circuit flow rate
6 Operating hours counter
7 Solar circuit settings
8 Solar circuit status line
i
Additional information on the solar functions,
for which a charge is due, (e.g. controlling two
or three solar cycles) will be provided in a sepa-
rate manual upon purchase.
i
The solar yield is displayed in the
mySOLARFOCUS app
(prerequisite: A
solar system controlled by the
controleco
manager-
touch
, including thermal unit
counter).
13 Temperature difference
charge control
(optional additional function)
Fig. 2-39_11-002
n
This function expands the control eco
manager-
touch
with two (independent) differential control circuits.
Suitable, for example, for charge pump control sys-
tems, for (rapid) tank charge, or return-stratification
in the tank.
n
The components of this charging circuit (e.g. cir-
culation pump, motor valve, etc.) can be regulated
by means of temperature differences between sen-
sors.
i
Further information can be obtained in a sepa-
rate set of instructions when you purchase this
function.
Operation manual
therminator II touch
29
