Solarflare Solarflare XtremeScale series, Руководство пользователя, Страница: 210 / 400

Solarflare Server Adapter User Guide
Solarflare Adapters on Windows
Issue 20 © Solarflare Communications 2017 203
/Vlan <VLAN tag[,priority[,name

[,DHCP|addr,mask[,gateway]]]>
Creates a VLAN with the specified ID and sets priority traffic
handling option.
P
– Handles priority traffic
N
‐ Does not handle priority traffic
This option must be used when a team is first created. It
cannot be applied to a team once it has been setup.
If you specify an IP address, you must specify a netmask as
well.
If the IP address is not specified, then
DHCP
is assumed. You
can also use
tag,priority,name,DHCP
to be explicit.
Formats:
• <tag>
e.g. 2 (assumes no priority)
• "<tag>,<priority>"
e.g. "2,p"
• "<tag>,<priority>,<name>"
e.g. "2,p,my name"
• "<tag>,<priority>,<name>,DHCP"
e.g. "2,p,my name,DHCP"
• "<tag>,<priority>,<name>,<addr>,<mask>"
e.g. "2,p,my name,10.1.2.3,255.255.255.0"
• "<tag>,<priority>,<name>,<addr>,<mask>,<gateway>"
e.g. "2,p,my name,10.1.2.3,255.255.255.0,10.1.2.1"
where:
• Tag: 0 to 4094
• Priority: either P (priority supported) or N (no priority)
• DHCP: may be omitted, and will be assumed, if it's the
last field
• IP Addresses: IPv4, dotted ‐ quad format
Note that <mask> must be present if <addr> is present
/Name <TeamName>
Specifies a name for the adapter team.
This option must be used when a team is first created. It
cannot be applied to a team once it has been setup.
Table 49: Sfteam Options
Option Description