Solarflare Solarflare XtremeScale series, Руководство пользователя, Страница: 179 / 400

Solarflare Server Adapter User Guide
Solarflare Adapters on Windows
Issue 20 © Solarflare Communications 2017 172
3 After making your changes, click Set and then click Close .
Adding Adapters to a Team
If additional Solarflare adapters are installed in your server, you can add them to an
existing team to increase the overall resilience or performance (aggregation) of the
server connection.
To add adapters to a team:
NOTE: Changing team settings can disrupt current services running on the server.
Solarflare recommend only changing network settings when disruption to the
services can be tolerated.
1 Start SAM and select a Solarflare adapter team from the Network Adapter list.
2 From the Actions list, click Add one or more adapters , or choose Actions > Add
one or more adapters . The Available Network Adapters dialog box is displayed:
To specify a new active
adapter:
For Fault ‐ Tolerant Teams only. Set your
preferred active adapter to the highest
prioritized adapter in the team. The highest
prioritized adapter becomes the active adapter
in the team after you apply your changes.
To change adapter priority, use the up and down
buttons.
To specify the Ethernet
frame length/MTU:
Specify a value between 1514 and 9216 bytes.
Check your network supports the new frame
length before setting the new value.
Note : This setting affects all adapters in the
team, and will override any individual adapter
settings made from the Configure Offload tasks,
Ethernet and other features window. See Using
SAM to Configure Adapter Features on page 160
for more details.
Table 39: Configure a Team Options