Solarflare Solarflare XtremeScale series, Руководство пользователя, Страница: 147 / 400

Solarflare Server Adapter User Guide
Solarflare Adapters on Windows
Issue 20 © Solarflare Communications 2017 140
4.3 Installing the Solarflare Driver Package on Windows
• Adapter Drivers Only Installation on page 141
• Full Solarflare Package Installation on page 142
• Repair, Remove and Change Drivers and Utilities on page 145
NOTE: The Solarflare adapter should be physically inserted before installing the
drivers. See Installation on page 31 .


The user must have administrative rights to install adapter drivers and may be
prompted to enter an administrator user name and password.


If Windows attempts to install the drivers automatically, cancel the Windows New
Hardware Found wizard and follow the instructions below.


Solarflare does not recommend installing drivers via Remote Desktop Protocol
(RDP). For example via Terminal Services.
The drivers install package is named after the Solarflare document part number e.g.
SF ‐ 107785 ‐ LS ‐ 2_Solarflare_Windows_x64_64 ‐ bit_Driver_Package.exe
This can be renamed e.g. setup.exe before use.
State and
statistics
analysis
Solarflare adapters provide comprehensive state and
statistics information for data transfer, device, MAC, PHY and
other adapter features.
• See Using SAM to View Statistics and State Information
on page 176
• See Sfteam: Adapter Teaming and VLAN Tool on
page 200 for teaming statistics.
• See Sfnet on page 211 for per interface statistics.
VMQ Solarflare drivers support static VMQ for Windows Server
2008 R2 and Dynamic VMQ on Windows Server 2012
See Virtual Machine Queue on page 167 .
Table 30: Solarflare Windows Features