11
Configuration
Note
The Solar-Log™ Smart Relay Station has the IP address 192.168.0.2 as factory setting.
•
In the Search menu, select the item Boot Loader Mode Devices only. In this mode, the IP address and netmask
(subnet Mask) fields can be edited.
•
Set the IP address and the netmask (subnet mask) accordingly to the used network and deactivate the functi-
on
TCP/IP Setting by DHCP.
•
Save the settings on the device by means of the menu item Program Device using the Save Config function.
•
The network settings of the Solar-Log™ Smart Relay Station have been adjusted.
•
Die Netzwerkeisntellungen der Solar-Log™ Smart Relais Station wurden angepasst.
•
Exit the Boot Loader mode. Hold both buttons of the Solar-Log™ Smart Relay Station down for 3 seconds.
„bld“ disappears from the display.
In the GBL_Conf system tool select the item All Devices in the Search menu. The set IP address and netmask (sub-
net mask) are displayed under Network Configuration. The fields are gray-shaded and cannot be changed here.
System tool GBL_Conf after successful IP address configuration