Pub. 42003-274B
G A I - T R O N I C S
®
A H U B B E L L C O M P A N Y
Ring Detect Relay Kit
Models 12565-009 and 12565-010
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374
◼
800-492-1212
◼
Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
Confidentiality Notice
This manual is provided solely as an installation, operation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third
party.
General Information
The ring detect relay kit activates a peripheral device, such as a beacon or sounder, when ring voltage is
present at the telephone. The kit includes a PCBA, mounting hardware and a USOC RJ11C modular
connector cord.
Use the Model 12565-009 Kit with the Model 354-001 NEMA 4X Industrial Telephone or Model 276-
001 Flush-Mount Handset Telephone with Keypad. Use the Model 12565-010 Kit with the Model 246-
001 Indoor Industrial Telephone or Model 256-001 Outdoor Industrial Telephone.
The ring relay PCBA connects to the industrial telephone PCBA via the USOC RJ11C modular connector
cord. This connects the telephone input wiring directly to the ring detect relay PCBA. Install the ring
detect relay PCBA on the back of the front panel in all applicable models (see the Model 354-001, Model
276-001, or Models 246-001 and 256-001 installation section).
The kits include the following components:
Table 1. Model 12565-009 Components
Qty Description
1
ringer relay PCBA
2
standoffs, #6-32 ×1.00-inches, F/F
2
standoffs, #6-32 × 1.25-inches, F/F
2
Phillips head machine screws, #6-32
× 5/16-inch
1
modular connector cord, USOC
RJ11C
Table 2. Model 12565-010 Components:
Qty Description
1
ringer relay PCBA
2
standoffs, 4-40
1.18 inches, M/F
2
standoffs, 4-40
1.25 inches, M/F
4
Phillips head machine screws, 4-40 ×
5/16-inch
1
PCBA mounting plate
1
modular connector cord, USOC RJ11C
2
Phillips head machine screws, 6-32 ×
5/16-inch
