10
Configuration
3�2
Configuration - IP Address of Solar-Log™ Smart Relay Station
The Solar-Log™ Smart Relay Station is equipped with a standard Ethernet RJ45 network socket that can be connec-
ted with any commercially available network cable.
Procedure
•
The commissioning steps must be completed.
•
Download and install the Gude System Tool (GBL_Conf.exe).
Note
The program as well as the firmware file can be found under:
https://www.gude.info/en/monitoring-remote-io/remote-io/expert-net-control-2312-1.html
Note
In the manual you will find the screenshots of GBL_Conf 2.7.7. The latest GBL_Conf is 2.7.11 and has
additionally the port HTTPS in the configuration. (See also GUDE „
nual)
•
Start up the system tool.
•
The software automatically searches for the Solar-Log™ Smart Relay Stations within the local area network.
•
The devices found are listed in the software.
•
Activate the Boot Loader mode of the Solar-Log™ Smart Relay Station:
Hold both buttons pressed down for 3 seconds. At first „blr“ is displayed. After 3 seconds the display changes
to „bld“. Further information about the Boot Loader Mode can be found in chapter 5.1.
•
Go back to the system tool
GBL_Conf