13
Configuration
Select the Relay Station with the plus symbol. The following settings are required here (see the figure further
below):
Device class:
•
Switch
Manufacturer:
•
Solar-Log
Type:
•
Smart Relay Station 3x 3.5kW (or 1x 3.5kW)
Interface:
•
Ethernet
Number of devices:
•
1 in the example
Confirm the settings with OK. Then start the device detection from the
Configuration | Devices | Detection
menu.
To enter the IP assigned above, go to the
Configuration | Devices | Configuration
menu under Device Configura-
tion, select the device and enter the IP address in the corresponding box.
Adjust the remaining configuration settings in this section (see the example figure further below).
