Sokkia iX-1001 Скачать руководство пользователя страница 69

Страница: 69 / 177

12. DISTANCE MEASUREMENT

2. Press

[S-LEV]

in Observation mode.

<Aiming> is displayed.



Allocating

[S-LEV]

: "19.12 Allocating

Operating Icons"

When

[S-LEV]

is pressed, a gauge indicating light

intensity is displayed.
• The more

displayed, the greater the

quantity of reflected light.

• If “



” is displayed, only enough light for the

measurement is returned.

• When “



” is not displayed, accurately resight the

target.

[BEEP]/[OFF]

: Sets a buzzer sound when

measurement is possible. Press to
switch on and off.

[MEAS]

: Returns to Observation mode and

starts angle and distance
measurement regardless of "Track
Setting" setting.

3. Press

[OFF]

to finish signal checking.

Press

{ESC}

to return to the previous screen.



• When

is displayed persistently, but “



” is not, contact your local dealer.

• If no key operations are performed for two minutes, the display automatically returns to the previous screen.

Содержание iX-1001


















































































































































































Результаты поиска

Содержание iX-1001

Отзывы:

Sokkia iX-1001, Руководство оператора, Страница: 69 / 177

Результаты поиска

Содержание iX-1001

Отзывы: