Sokkia iX-1001 Скачать руководство пользователя страница 117

Страница: 117 / 177

113

19. CHANGING THE SETTINGS

PROCEDURE Editing target information

1. Select a target to edit in <Reflector> and press

[EDIT]

. Select/input relevant information for the

target.

Items set and options
(1) Reflector type

      Prism/Sheet/N-Prism/360° Prism
(2) Prism Const.correction value
      -99 to 99 mm
(3) Aperture
      1 to 999 mm

• When 0.1mm is selected in "Dist.reso", "Prism

constant value" can be input to the first decimal
place.



"19.1 Observation Conditions - Angle/Tilt"

•

[DEL]

: Deletes the selected target.

2. Press

[OK]

to confirm the settings.

PROCEDURE Adding a target

1. Press

[ADD]

in <Reflector> to display the list of

candidate targets.

2. Select a frequently-used target from the list

referring prism const.correction value and
aperture.

• Up to a maximum of 6 targets can be registered.
• When selecting "N-Prism", prism constant

correction value and aperture are not set.

3. Press

[OK]

to confirm the settings.

Содержание iX-1001


















































































































































































Результаты поиска

Содержание iX-1001

Отзывы:

Sokkia iX-1001, Руководство оператора, Страница: 117 / 177

Результаты поиска

Содержание iX-1001

Отзывы: