Sokkia iX-1001 Скачать руководство пользователя страница 101

Страница: 101 / 177

16. OFFSET MEASUREMENT

3. Set the instrument station and the backsight

station to define the reference direction. Select
"Occupy setup" in <Offset>. Enter data for the
instrument station and press

[OK]

to move to

Backsight setup.



"13.1 Entering Instrument Station Data"

4. Set the azimuth angle for the backsight station.

Press

[OK]

to return to <Offset>.



"13.2 Azimuth Angle Setting"

5. Select “OffsetDIST”.

Input the following items.
(1) Direction of the offset point.

(2) Horizontal distance from the target point to the

offset point.

• Direction of offset point

6. Sight the offset point and press

[MEAS]

in the

screen of step 5 to start measurement.
Press

[STOP]

to stop the measurement.

The measurement results are displayed.

• Press

[HVD/nez]

to switch results for the target

point between distance/angle values and
coordinate/elevation values.

←

: On the left of the target point.

→

: On the right of the target point.

↓

: Closer than the target point.

↑

: Beyond the target point.

Results for target point

Results for offset point

Содержание iX-1001


















































































































































































Результаты поиска

Содержание iX-1001

Отзывы:

Sokkia iX-1001, Руководство оператора, Страница: 101 / 177

Результаты поиска

Содержание iX-1001

Отзывы: