Sokkia CX-101 Скачать руководство пользователя страница 4

Страница: 4 / 322

HOW TO READ THIS MANUAL

Symbols

The following conventions are used in this manual.



: Indicates precautions and important items which should be

read before operations.



: Indicates the chapter title to refer to for additional information.



: Indicates supplementary explanation.



: Indicates an explanation for a particular term or operation.

[MEAS]

etc.

: Indicates softkeys on the display.

{ESC}

etc.

: Indicates operation keys on the CX.

<S-O> etc.

: Indicates screen titles.

Notes regarding manual style

• Except where stated, “CX” means CX-101/102/103/105/107.
• The CX Series is available in "standard" and "Low Temperature" models. Users

with a "Low Temperature Model" should read the additional precautions specific
to use under low temperatures.

●

Low Temperature Model

Low Temperature Models display the
seal shown at right.



• Do not remove the Low Temperature

Model seal from the instrument. This
seal is used for model recognition by
our engineers during maintenance.

• Screens and illustrations appearing in this manual are of CX-103 (standard

model).

• Location of softkeys in screens used in procedures is based on the factory

setting. It is possible to change the allocation of softkeys in OBS mode.



What are softkeys: "4.1 Parts of the Instrument", Softkeys allocation:

"33.3 Allocating Key Functions"

• Learn basic key operations in "5. BASIC OPERATION" before you read each

measurement procedure.

• For selecting options and inputting figures, see "5.1 Basic Key Operation".

Low temperature

seal

Содержание CX-101



































































































































































































































































































































Результаты поиска

Содержание CX-101

Отзывы:

Sokkia CX-101, Руководство по обслуживанию, Страница: 4 / 322

Результаты поиска

Содержание CX-101

Отзывы: