manualshive.com logo in svg

Sokkia CX-101, Руководство по обслуживанию, Страница: 23 / 322

Поделиться
Скачать
Sokkia CX-101 Скачать руководство пользователя страница 23

13

4. CX FUNCTIONS

Sighting collimator

Use sighting collimator to aim the CX in the direction of the measurement 
point. Turn the instrument until the triangle in the sighting collimator is 
aligned with the target.

Instrument height mark

The height of the CX is as follows:

• 192.5mm (from tribrach mounting surface to this mark)
• 236mm (from tribrach dish (TR-102) to this mark) 

"Instrument height" is input when setting instrument station data and is the 
height from the measuring point (where CX is mounted) to this mark.

Trigger Key

Press the trigger key when the CX is in the OBS mode or when 

[MEAS]

/

[STOP]

 is indicated on the display unit. You can start/stop measurement.

In the screen displaying 

[AUTO]

, press trigger key to perform automatic 

operation from distance measurement to recording.

Laser-pointer Function

A target can be sighted with a red laser beam in dark locations without the 
use of the telescope.

Independent Angle Calibration System (IACS) technology 

(CX-101/102 only)
This revolutionary technology provides an even higher level of stability and 
reliability for angle measurement. With IACS technology, the instrument 
independently calibrates angle to a high degree of accuracy, and eliminates 
the need for a reference standard instrument when performing calibration.

Independent angle calibration cannot be performed by the user.

         Consult your local dealer.

Содержание CX-101



































































































































































































































































































































Отзывы:

Нет отзывов