Sokkia CX-101 Скачать руководство пользователя страница 150

Страница: 150 / 322

21. MISSING LINE MEASUREMENT

140

• Pressing

[REC]

displays the

screen shown in right. Pressing

[OK]

records the measured

results for the second point.

Press

[OK]

to record missing

line measurement results and
return to the results screen.

Press

{ESC}

to continue

measurement without saving
2nd target or missing line
measurement results.



• Missing line measurement

results cannot be recorded when
point names for 1st and/or 2nd
target are null. Always input
point names for both targets.

4. Sight the next target and press

[MLM]

to begin observation.

Slope distance, horizontal
distance and height difference
between multiple points and the
starting position can be measured
this way.

• When

[S/%]

is pressed, the

distance between two points (S)
is displayed as the gradient
between two points.

• Press

[MEAS]

to re-observe the

starting position. Sight the
starting position and press

[MEAS]

10.000
20.000
30.000

1.500

Z
HR
PT

1010

HD
VD

27.345m

1.012m

PT1
PT2
CD

1010

LIST

ADD

SRCH

MLM

20.757m

27.345m

1.012m

REC

MOVE

MEAS

MLM

Содержание CX-101



































































































































































































































































































































Результаты поиска

Содержание CX-101

Отзывы:

Sokkia CX-101, Руководство по обслуживанию, Страница: 150 / 322

Результаты поиска

Содержание CX-101

Отзывы: