Softube AAX DSP, Руководство пользователя, Страница: 75 / 182

SOFTUBE USER’S GUIDE |
75
Signal Routing
The signal routing is very straight forward, except
for the VU meters on the EQF-100, which are
always placed at the master input and the master
output. See the block diagram for more informa-
tion.
Gain Staging
There are two main volume controls on this unit,
the Output Volume on EQF-100 and the Gain
knob on the TLA-100A. The best way to use these
volume controls is to make sure the apparent audio
level stays approximately the same when you bypass
the unit. That way it will be easier to bypass and
compare the audio, and also to switch order of the
compressor and equalizer.
bypassed. Left position:
engaged.
EQ Before Compressor
Compressor Before EQ
Selects if the equalizer should
process the sound before the
compressor (default) or the
other way around. Left posi-
tion: Eq before compres-
sor. Right position: com-
pressor before eq.
It is also possible to click on the pilot lamps of each unit to
engage or bypass them.
EQ Before Compressor
Compressor Before EQ
EQ COMP.
Compressor
Controls
Saturation Gain EQ
Controls
EQ
Bypass
EQ
Output
Volume
INPUT VU OUTPUT VU Gain Reduction VU
EQ
Output Tubes
Comp.
Output Tubes
Comp.
Bypass
EQ COMP.
Compressor
Controls
Saturation Gain EQ
Controls
EQ
Bypass
EQ
Output
Volume
INPUT VU OUTPUT VU Gain Reduction VU
EQ
Output Tubes
Comp.
Output Tubes
Comp.
Bypass
EQ COMP.
Compressor
Controls
Saturation Gain EQ
Controls
EQ
Bypass
EQ
Output
Volume
INPUT VU OUTPUT VU Gain Reduction VU
EQ
Output Tubes
Comp.
Output Tubes
Comp.
Bypass
EQ COMP.
Compressor
Controls
Saturation Gain EQ
Controls
EQ
Bypass
EQ
Output
Volume
INPUT VU OUTPUT VU Gain Reduction VU
EQ
Output Tubes
Comp.
Output Tubes
Comp.
Bypass