Softube AAX DSP Скачать руководство пользователя страница 66

Страница: 66 / 182

66 | METAL AMP ROOM

Room

The room is a very important part of the sound, and

we had the opportunity of visiting The Haunted

while they were laying down tracks for their new

album in the In Flames studio (previously known

as Studio Fredman). Tue Madsen and Patrik Jensen

made sure that all the cabs and the microphones

sounded just the way they should. You cannot get

more metal than that.
ENGL is a registered trademark of Beate

Ausflug and Edmund Engl. MARSHALL is a

registered trademark of Marshall Am-

plification PLC.

Gate and Preamp

The noise gate and balancing preamp was developed

by Softube, and has not yet had the chance to be

embodied in a real piece of gear.

Credits

Niklas Odelholm – modeling and sound design.

Oscar Öberg – concept, preamp modeling, sound

and DSP-programming. Arvid Rosén – power amp

modeling and sound programming. Torsten Gatu

– interface and DSP programming. Ulf Ekelöf –

graphics programming and 3D rendering. Patrik

Jensen – amp selection and sound design. Tue

Madsen – sound design and cabinet measurements.

Bypassing Amps or Cabs

You can choose to bypass the amp or the cabinet

by selecting amp bypass or cab bypass from the

small box in the lower right corner.
This is very useful if you want to use Metal Amp

Room with an external speaker (or speaker plug in)

or if you just want to add a cabinet simulation to a

track, such as a recorded line out from your ampli-

fier.

By bypassing the cabinets in Metal Amp Room, you can
use the cabinets from the other Amp Room plug ins. Just
insert, for example, Bass Amp Room (with bypassed
amplifier) on the track after Metal Amp Room (with a
bypassed cabinet).

Buying Recommendations

If you like the sound from Metal Amp Room and

would like to get that sound using the real deal (let’s

face it, a real amp is always sexier than a plug in),

here are some buying recommendations.

Amplifier

The sound of the amplifier is very much inspired by

the one and only metal amp, the Engl Powerball. To

get a nice rhythm channel, we utilized our soldering

gear and bred our own JCM800/Powerball mutant.

Metal Cabinet

If the Metal Cabinet is your thing, run out and get

a slanted Engl E 412 V 4x12 cabinet for live gigs.

Black Cabinet

For that classic vintage sound, we recommend a

brand new straight Marshall 4x12 cabinet.

Содержание AAX DSP























































































































































































Результаты поиска

Содержание AAX DSP

Отзывы:

Softube AAX DSP, Руководство пользователя, Страница: 66 / 182

Результаты поиска

Содержание AAX DSP

Отзывы: