Softube AAX DSP, Руководство пользователя, Страница: 137 / 182

SOFTUBE USER’S GUIDE | 137
Switches
All three switches work independently of each other, so don’t be alarmed. Once you know what each switch
does, the Dyna-mite will be easy to operate.
Detector Source (INT, DS-FM, EXT)
Determines the source of the detector.
INT
Internal source, normal operating mode for noise gating, expanding or limiting. The
gain reduction circuit acts upon the same signal that is fed to the detector.
DS-FM
Internal source, but with a detector filter that boosts the high frequencies, thus mak-
ing it easier for high frequencies to trig the detector.
This mode can be used for de-essing, or it can be used rather creatively when in-
creased sensitivity to high frequencies is desirable.
EXT
External source, or “side-chaining”. The detector is fed a separate signal (a side-
chain) and calculates the gain reduction from this signal. This gain reduction is then
applied to the main signal. This is used for keying (side-chain expanding) and duck-
ing (side-chain compression) modes.
Mode (EXP, OUT, LIMIT)
Determines if the Dyna-mite should expand or limit the sound.
EXP
Expander mode. Reduce gain for signals below Threshold.
OUT
Bypass. Output volume knob and output stage clipping still active.
LIMIT
Limiting mode. Reduce gain for signals increasing above Threshold.