Softube AAX DSP, Руководство пользователя, Страница: 44 / 182

44 | BASS AMP ROOM
Buying Recommendations
If you like the sound from Bass Amp Room and
would like to get that sound using the real deal (let’s
face it, a real amp is always sexier than a plug -in),
here are some buying recommendations.
Amplifier
If you like this characteristic fat distortion and
scooped- out tone stack, I would suggest that you
get a two -channel Hiwatt DR 103 from the late
‘70s/early ‘80s.
Cabinets and Mic
The leftmost cabinet was modeled after the in-
dustry standard of bass cabinets: the Ampeg 8x10”
SVT810. If you like the 4x12 sound, I’d suggest that
you try out a couple of different 4x12s, because we
have absolutely no clue what kind of 4x12 we meas-
ured. It sounded excellent, had no labels on, and
wasn’t for sale... The small cabinet was a half- open
1x12” cabinet with a Celestion 20W/15ohm driver.
But you will also need a good sounding mic to get a
good bass sound, and in our opinion nothing beats
the Sennheiser MD421!
D.I. and Mix Panel
The tone controls of the D.I. and limiter was made
by us and have no hardware counterpart.
Room
If you like the sound of the room, make sure to
schedule a session at Care Of Sound in Norrköping.
Brand names are trademarks or regis-
tered trademarks of their respective
owners.
Credits
Niklas Odelholm – modeling and sound design.
Oscar Öberg – compressor modeling, framework
programming. Torsten Gatu – interface program-
ming. Arvid Rosén – framework programming. Ulf
Ekelöf – 3D rendering.