Softube AAX DSP, Руководство пользователя, Страница: 109 / 182

SOFTUBE USER’S GUIDE | 109
TSAR-1R Reverb
THE TSAR-1R REVERB USES THE SAME algorithm
as its big brother, but is controlled by just three
reverb parameters.
Predelay
The Predelay has the same function as the
TSAR-1 Reverb, but is limited to 200 ms maxi-
mum delay time (which is more than enough
for natural sounding reverbs).
Time
Instead of just altering the Reverb Time
parameter from TSAR-1, this Time parameter
adjusts an internal predelay, the early reflections,
diffusion, density and decay time. All these
parameters have been meticulously fine-tuned
to give as natural sounding result as possible for
every setting.
Use the Time parameter to decide which type
of space you want to set your instrument in.
Don’t be afraid of large halls. If you get too
much reverb with a high Time setting, use the
Reverb Mix or the send volume to decrease the
amount of reverb.
Color
Set the overall tonal character of the reverb.
BRIGHT is useful for strings and vocals, or when
you want to give the perception of a highly
reflective room, NEUTRAL for normal halls or
studios, and DARK for smaller spaces with a lot
of acoustic damping.