Softube AAX DSP, Руководство пользователя, Страница: 56 / 182

56 | FOCUSING EQUALIZER
Knobs
Saturation
Sets the amount of saturation. The saturation circuit is completely bypassed if the
knob is set in the minimum position.
Saturation Type
With keep low you will be able to distort the track without getting a farty bass
sound. Keep high will do the same, but for high frequency material. Neutral will not
do anything special with either the high or low frequencies.
Low and High Cut
6dB/octave (Passive mode) or 18dB/octave filters (Active mode).
Low, Mid and High
Adjust the gain of the filters. The Low and High Gain will only boost the low and
high frequencies. If you need to cut, you will have to use the Low and High Cut fad-
ers.
Equalizer Type
Choose between the passive type or an active type equalizer. Affects all equalizer
controls, but not the saturation circuit. You can also bypass the entire EQ circuit (and
just use the saturation circuit) by setting this in the off position.
Output
Output volume. Goes from nothing to +12 dB. At the 12 o’clock position, it’s set at
0dB, and going clock wise will increase the output volume by +2 dB for each mark.
Saturation
Saturation Type Low Gain Mid Gain High Gain Equalizer Type
Low and High Cut Output Volume