Softube AAX DSP, Руководство пользователя, Страница: 154 / 182

154 | VINTAGE AMP ROOM
Knobs
The functionality of the knobs on the front panel of the plug in corresponds to the front panel of the real
amplifier, except the spring reverb, which hasn’t been included in this plug in. We have also added a “Vibra-
to” switch, which on the real amplifier is a foot switch. There is also a difference when all the tone controls
are set at 0, see “Treble, Middle, and Bass” below.
Volume
This amplifier doesn’t have a Master Volume control, so the Volume knob controls
both the preamplifier and power amplifier distortion.
Bright
Turn on this switch to get a high frequency boost. Works only at low to moderate
Volume settings.
Treble, Middle, and
Bass
These knobs are the tone control of the amplifier, but they also control the amount
of distortion. If you, for example, have too much distortion in the bass frequencies,
try turning down the Bass knob. (Electrically speaking, the tone controls are located
before the preamp distortion.)
The tone controls behave exactly like the real thing, except when all the controls are
set fully counter clock wise. On the real amp, the amplifier would have become silent,
as if you turned down the volume. A lot of reasons made us exclude this “feature,” so
now when you turn the Treble, Middle and Bass knobs fully counter clock wise, that
actually corresponds to the knobs being set to a little bit over nothing on the real amp.
Vibrato, Speed and
Intensity
Turn on the vibrato (which is in fact a tremolo) by turning on the Vibrato switch. Use
Speed to control the speed of the tremolo, and Intensity to control the amount of the
tremolo effect.
Volume Bright Treble Middle Bass
Vibrato
On/Off
Vibrato
Intensity
Vibrato
Speed