Soft Imaging System ColorView III, Руководство пользователя

Страница: 69 / 80

Installation of the image-analysis software
67
How to install the camera
1)
The diagram shows a typical installation of a light microscope. You
should have all required components ready at hand.
2)
Remove the protective cap from the camera.
3)
Firmly screw the TV adaptor (1/1,8" or bigger) onto the camera. This
should be done with the CCD-chip side of the camera facing down to
minimize the chance of dust landing on its surface.
4)
Install this assembly onto the microscope's camera mount. Some mi-
croscopes may require additional optical elements installed between
the camera mount and the C-mount adapter. You may also need to
align the orientation of the microscope with that of the stage, and also
match the focus of the camera image with that of the eyepiece image.
These settings can be done later when you are able to obtain an image
on the screen.
5)
Plug one end of the FireWire cable into the camera connector.
"
The FireWire cable plug is not symmetrical. You must make sure
that the cable plug is facing the same way as the camera socket
when you plug the cable into the camera jack. The camera chip
may be ruined otherwise.
III