Snorkel S3006P, Руководство оператора

Страница: 11 / 25

PUSH PRO -0120843 9
Ground Operation Button
The ground operation button prevents platform
movement if the platform raise or lower button is
accidentally pressed. This switch is spring returned to
the off position.
Press and hold the ground operation switch inward
continually to operate the machine from the lower
controls.
Platform Raise/Lower Buttons
The platform raise/lower buttons are used to raise or
lower the platform. The buttons are spring returned to
the off position.
• Press and hold the platform raise button to raise
the platform.
• Press and hold the platform lower button to lower
the platform.
• An alarm will sound as the platform lowers.
Battery Charger
The battery charger is operated on a110V electrical
circuit.
Upper Controls
The upper controls (refer to Figure 3) are located on
the control panel at the front of the platform.
The following controls are located on the upper control
panel:
• Interlock button
• Battery condition indicator
• Platform raise/lower buttons
• Emergency stop button
!
Warning
The aerial platform is free to move when the
brakes are released. Death or serious injury can
result. Engage the brakes before operating the
aerial platform.
Emergency Stop Button
The emergency stop is a two-position, red push button
on the right side of the upper control panel.
• Push the button inward to disconnect power from
all control circuits at the upper controls.
• Twist the button clockwise to restore power.
Push the button in when the upper controls are not
in use to help protect against unintentional platform
operation.
Interlock Button
The interlock button prevents platform movement if the
platform raise or lower button is accidentally pressed.
This switch is spring returned to the off position.
Press and hold the interlock button inward continually
to operate the machine from the upper controls.
Platform Raise/Lower Buttons
The platform raise/lower buttons are used to raise or
lower the platform. The buttons are spring returned to
the off position.
• Press and hold the platform raise button to raise
the platform.
• Press and hold the platform lower button to lower
the platform.
• An alarm will sound as the platform lowers.
Battery Condition LED
The Battery Condition LED illuminates to give an ap-
proximate indication of the amount of charge remain-
ing in the battery as follows:
Not illuminated 100% to 40%
Slow flash 40% to 20%
Fast flash 20% to 10%
Steady on less than 10%
Note:
To maximise battery life always recharge the
battery after use and never store the machine for
extended periods without first fully recharging the
battery.
Controls and Indicators