LC2000/LC2000-IQ/LC4000/LC4000-IQ
Operation Using the Front Panel
Issue 1 Rev 6
Page 34
© 2015 SAM
6.8 Entering Alphanumeric Characters
Occasionally you may need to enter alphanumeric characters manually. This could be when
setting an IP address or entering a memory name, for example.
To enter values manually:
1.
Navigate to a menu option that requires manual text input, for example, Memory
Name.
2.
On the text box, press the Control knob.
The text entry cursor appears.
3.
Press the relevant Alphanumeric buttons, 1 to 8, repeatedly until the desired
character appears. If the next character you want is on the same button as the
present one, wait until the cursor blinks once before pressing the button again.
•
To enter a space between characters, press button 0.
•
To enter a special character, such as the @ symbol, press button 9.
•
To delete a character, press the Back button.
4.
When you have finished entering the name, press the Control knob to set it, and press
it again on Done to confirm.
6.9 Resetting Menu Options to Preset Values
If you need to reset a menu option to its preset default value, for example a slider value, do
the following:
•
From the menu option selected, press and hold the Control knob for a few seconds.
The values are reset.
6.10 Using Shortcuts
The Shortcut buttons provide access to the more commonly used menus.
For example, to access the Video menu:
•
On the front panel, press the VIDEO Shortcut button.
The Video menu list is displayed.
Note:
Shortcuts are only available when the buttons are illuminated.
