LC2000/LC2000-IQ/LC4000/LC4000-IQ
Channel Operation Menus
Issue 1 Rev 6
Page 91
© 2015 SAM
8.10.5 Memory Name
To change a memory name:
1.
From the Memory Name menu, select Change Name.
2.
Select the text box.
The text entry cursor appears.
3.
Press an Alphanumeric button, 1 to 8, repeatedly until the desired character appears.
If the next character you want is on the same button as the present one, wait until the
cursor blinks once before pressing the button again.
•
To enter a space between characters, press button 0.
•
To enter a special character, such as the @ symbol, press button 9.
•
To delete a character, press the Back button.
To save a memory name:
•
From the Save Memory menu, select Save Memory.
8.11 RollCall
The RollCall menu enables you to name the unit for use remotely with the RollCall Control
Panel. For more information about the RollCall Control Panel, see page 92.
8.12 Logging
Logging defines what parameter information is made available to a logging device attached to
the RollCall network.
You can select to enable logging and view the status of the following parameters:
•
Input Ident
•
Input Standard
•
Input State
•
Output Ident
•
Output Standard
•
MSG Status
Note:
MSG Status shows a confirmation message that the log server is running.
