LC2000/LC2000-IQ/LC4000/LC4000-IQ
Conversion Operational Examples
Issue 1 Rev 6
Page 162
© 2015 SAM
A.5 Using Decoded Dolby E Audio when Converting Video
Example
You want to route the first pair from a decoded Dolby E source, using processing channel 1, to
PCM on SDI output A1 embedded audio pair 1 (assuming only one Dolby option is fitted).
A.5.1 From the Front Panel
1.
On the front panel, press the SYSTEM Shortcut button.
2.
Select Dolby > Dolby Ch 1 > Decoder source > Embedded 1, then select Done.
3.
Press the HOME button.
4.
Press CH SELECT until the channel 1 LED is illuminated.
5.
Press the AUDIO Shortcut button.
6.
Select Routing > Pair 1 Source > Dolby Decoder 1, then select Done.
Note: This selects pair 1 from the Dolby decoder.
A.5.2 From the RollCall Control Panel
1.
From the System menu list, select Dolby.
2.
In the Dolby Ch1 Decoder Source box, select Embedded 1.
3.
From the Channel 1 menu list, select Audio Routing.
4.
Next to Dolby Decoder 1, select the radio button under the Pair 1 column.
