LC2000/LC2000-IQ/LC4000/LC4000-IQ
Conversion Operational Examples
Issue 1 Rev 6
Page 163
© 2015 SAM
A.6 Transcoding Dolby E Audio when Converting Video
Example
You want to transcode incoming Dolby from a 50 Hz source on pair 1 using processing
channel 2 to match a frame rate converted video output at 59 Hz, which will be routed to SDI
out B1 embedded audio pair 1 (assuming two Dolby options are fitted).
A.6.1 From the Front Panel
1.
On the front panel, press the SYSTEM Shortcut button.
2.
Select Dolby > Dolby Ch 2 > Decoder source > Embedded 1, then select Done.
3.
Press the HOME button.
4.
Press CH SELECT until the channel 2 LED is illuminated.
5.
Press the AUDIO Shortcut button.
6.
Select Routing > Pair 1 Source > Dolby Encoder, then select Done.
Note: This selects pair 1 from the Dolby decoder.
A.6.2 From the RollCall Control Panel
1.
From the System menu list, select Dolby.
2.
In the Dolby Ch 2 Decoder Source box, select Embedded 1.
3.
From the Channel 2 menu list, select Audio Routing.
4.
Next to Dolby Encoder 1, select the radio button under the Pair 1 column.
Note: The audio status for pair 1 now shows “E”.
