Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 36
© 2016 SAM
HD Input Format
For HD/UHD inputs, manually select forced format from the list:
•
Normal
(default): use default aspect ratio
•
14:9 pillarbox
: preserves the original aspect ratio of HD content with a 14:9 aspect
ratio, with bars visible at the sides of the screen.
•
4:3 pillarbox
: preserves the original aspect ratio of HD content with a 4:3 aspect
ratio, with bars visible at the sides of the screen.
Out Config
Convert Scaling
•
Fit to height
: Scales the image to fit the height of the screen while maintaining the
aspect ratio.
•
Fit to width
: Scales the image to fit the width of the screen while maintaining the
aspect ratio.
•
14:9
: Can scale either a 4:3 image for viewing on a 16:9 screen, or a 16:9 image for
viewing on a 4:3 screen. This is a compromise in order to maintain the aspect ratio of
the image, but will crop some of the image in the process (top and bottom when
viewing 16:9, and left and right when viewing 4:3).
SD out format
•
Normal
(default): Use default aspect ratio
•
Anamorphic
: Horizontally squeezes a widescreen image to fit a standard 4:3 aspect
ratio.
6.4.8.5
Out Signalling
Controls the signalling defined on the output.
SMPTE 2016
Uses SMPTE 2016 signaling. Available controls are:
•
ST2016 mode
-
•
Auto
: automatically sets the conversion based on a combination of the input and
output standards.
•
Pass
: passes SMPTE 2016 information through the unit unchanged.
•
Force
: forces the conversion specified on the output.
•
Delete
: deletes SMPTE 2016 information from the output signal.
•
Out line
- Selects the output line on which SMPTE 2016 information is placed.
•
Out line status
- Displays the line number on which SMPTE 2016 information is
placed.
