Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 50
© 2016 SAM
3.
Set
IP Configuration
to
Fixed Address
.
4.
Enter
IP Address
,
IP Gateway
and
IP Netmask
details as required. Factory default
values can be restored by clicking
Default
.
5.
Click
Apply IP Changes
to update the network configuration.
6.5.1.2
Setting a Timecode Start Point
1.
Open a suitable browser window, type the unit’s IP address into the address bar and
press R
ETURN
. The browser connects to the unit and the UI is displayed.
2.
Click
Timecode
; the Timecode page is displayed:
3.
Enter the required
Timecode Entry
, and click
Timecode Load
; the new start point is
set.
Figure 2
Browser Control Interface - Ethernet
Figure 3
Browser Control Interface - Timecode Processing
