Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 28
© 2016 SAM
6.4.4.3
Audio Control
Audio control adjusts the audio on each processing channel.
6.4.4.4
Analog I/O (audio option only)
The
Analog I/O
menu allows output audio pairs to be mapped to the outgoing analog pairs.
Audio Control
Available Choices
Audio gain
Audio gain can be adjusted from -18dB to +18dB in steps of
0.1dB. Default is 0dB.
First select the required output channel from the list of
channels (Out Ch 1 to Out Ch 16), then adjust the gain using
the rotary control.
Pair delay
Pair delay can be adjusted for each of the eight audio
channel pairs.
The adjustment range is -40ms to +200ms in 1ms steps.
The default value is 0ms.
To adjust delay offset, first select the process pair from the
process pair list (Process pair 1 to Process pair 8) then
select the required delay offset using the rotary control.
Pair delay status
Shows the total delay per pair in ms. Select the required pair
from the audio status list (Pair 1 total to Pair 8 total) to view
the total delay applied to that pair.
Global delay status
Shows the current total audio delay through the unit in ms.
Video delay status
Shows the current total video delay through the unit in ms.
Dolby E align
Dolby E alignment offset can be selected from -10 lines to
+10 lines in steps of 1 line.
Default is 0 lines.
Tone freq
Tone frequency can be selected from 100Hz to 10000Hz in
steps of 100Hz.
Default is 1000Hz.
Note:
•
Global delay is applied to all channels. Individual pair delays are added/subtracted
from this delay.
Pair delay is added instantaneously and will produce an audible disturbance.
Global delay is added or subtracted at the rate of 2ms/s, and does not produce an
audible disturbance. Allow time for the global delay to settle to the desired value.
•
The maximum audio delay (video processing delay + added audio delay) is limited
to 260ms.
Analog I/O
Available Choices
Out 1 source
Ch1 Pair 1 to Pair 8
Ch2 Pair 1 to Pair 8
Out 2 source
Ch1 Pair 1 to Pair 8
Ch2 Pair 1 to Pair 8
