Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 49
© 2016 SAM
6.5 Operation Via Web Browser
The UHD1000 can be operated from a web browser as well as from the front panel. Simply
type the unit's IP address, shown on the bottom of the Home screen, into a browser address
bar. This will open a user interface allowing control of the UHD1000:
The buttons at the top of the screen correspond to the buttons on the front panel, and offer the
same functionality. Layout of the controls is a little different to those on the unit - sliders are
used to set values for instance, and audio routing and shuffling are set by selecting items in a
matrix - but the UI is intuitive and easy to use.
6.5.1 Browser-only Operations
Currently, defining a fixed IP address, specifying a start point from which to generate a new
timecode and upgrading the unit’s software can be performed via the browser GUI only.
6.5.1.1
Defining a Fixed IP Address
1.
Open a suitable browser window, type the unit’s IP address into the address bar and
press R
ETURN
. The browser connects to the unit and the UI is displayed.
2.
Click
Network
; the Network page is displayed:
Figure 1
Browser Control Interface - UI Input and Output
Note:
The browser UI utilizes HTML5, and therefore requires the use of a modern browser. The
UI has been tested with Chrome, Firefox and Internet Explorer/Edge. Please be aware
that, at the time of writing, Internet Explorer does
not
allow the update package to be
uploaded to the unit, although the upgrade itself can be performed using IE. Until this has
been resolved, we recommend that Firefox or Chrome be used when upgrading units.
Some minor cosmetic changes may be noticed in the web UI depending on the web
browser.
