Snell Advanced Media Kudos Pro UHD1000 Скачать руководство пользователя

Страница: 51 / 51

Kudos Pro UHD1000

System Operation

Issue 1 Rev 2

Page 51

6.5.1.3

Upgrading UHD1000 Software

New versions of the UHD1000 software are released periodically. Follow the instructions
below to install these updates.

Open a suitable browser window, type the unit’s IP address into the address bar and
press R

ETURN

. The browser connects to the unit and the UI is displayed.

Click

Setup

; the Setup page is displayed:. Scroll down to the

Upgrade

section:

Click

Choose File

; a standard Windows Browse dialog is displayed. Navigate to the

upgrade package, select it and click

Open

; the Browse dialog is closed, and the

package name is displayed next to

Choose File

Click

Send to Unit

; the software is copied to the unit. When the copy is complete, the

user is prompted to start the upgrade; click

Upgrade Unit

to begin.

Progress of the upgrade is displayed in the

Status

field; note that the unit will reboot

as part of the process.

When the upgrade is complete, a confirmatory message will be displayed. Successful
completion is also confirmed by the

Software Version

field at the top of the Setup

page, which should reflect the new software version.

Recovery Mode

If the upgrade fails, because of network failure for instance, the UHD1000 will restart in

Recovery

mode. In this case, repeat the upgrade installation procedure described above.

Note:

•

Ensure that the upgrade package is readily accessible before beginning the
upgrade.

•

The upgrade process will take around 15 minutes. The unit will not be able to be
used until the process is complete.

Figure 4

Browser Control Interface - Software Upgrade

Содержание Kudos Pro UHD1000




















































Результаты поиска

Содержание Kudos Pro UHD1000

Отзывы:

Похожие инструкции для Kudos Pro UHD1000

Бренды по названию

Популярные бренды

Snell Advanced Media Kudos Pro UHD1000, Руководство пользователя

Результаты поиска

Содержание Kudos Pro UHD1000

Отзывы:

Похожие инструкции для Kudos Pro UHD1000

Бренды по названию

Популярные бренды