Snapmaker A150, Быстрый старт

Страница: 9 / 41

10
|
Quick Start Guide
|
11
Before You Start
1.7 Video Tutorials
We provide both the video tutorials and Quick Start Guide which help you get started. You can either read this
Quick Start Guide to finish assembly and begin your maker journey, or watch the video tutorials at
https://
snapmaker.com
1.8 Used Symbols
1.9 Get the Screwdriver Ready
The screwdriver head H 2.5 is used for assembling the machine. The other heads are used for maintenance.
Make sure the screw head holder has been put back inside of the handle before use.
CAUTION
NOTICE
TIPS
Ignoring this type of message might result in malfunction or damage of the
machine and injuries to users.
Details you should be aware of throughout the process.
Tips offer you convenient operations and additional options.
Make sure that the highlighted part is facing the right way.
Do not tighten the screws when this symbol appears. Always tighten the
screws when it is absent.
Ball End Mill x 1 Flat End Mill x 1
M4 x 10 Hex Socket
Head Screw x 7
ER11 Collet (Only for 3.175 mm
CNC Bits) x 1 + ER11 Nut x 1
Wing Nut x 4
14mm Open-End Wrench x 1
17mm Open-End Wrench x 1
Palette Knife x 1
M4 x 8 Screw x 22
Screwdriver x 1
USB Disk x 1
Tweezer x 1
M4 x 70 Screw x 4 M4 x 30 Screw x 4
Tool Box
Material Bag
Wiping Cloth x 1 CNC Material x 1 Laser Material x 2 Calibration Card x 2
Diagonal Pliers x 1
Silicone Plug x 8
Foot x 4 + M4 x 10 Hex Socket
Head Screw x 4
Divider x 6 Cable Holder x 1
Steel Strip Adjustor (For
Maintenance) x 1
Cable Tie x 1
Hot End Kit x 1