Snapmaker A150, Быстрый старт

Страница: 31 / 41

54
|
Quick Start Guide
|
55
Laser Engraving and Cutting
1. Download our software Snapmaker Luban at https://snapmaker.com and install it. Then connect to a Wi-Fi
network: Enter the Workspace -> Connection -> Select Wi-Fi -> Click -> Select your machine -> Click
Open -> Tap Yes on the touchscreen
.
2. Click Camera Capture in the laser G-code generator and then click Start . Wait for the machine to take
photos and stitch them into a panorama of the platform, click Confirm .
4.3 Prepare the G-code File and Start Cutting
Guides & Pictures / Snapmaker
If you find the edges of the captured image are not aligned, you shall click Calibration to
manually calibrate the camera.
Zoom into the image and move the lines until they perfectly match the square, click Confirm ->
Apply to see the finished image.
Click Confirm and the finished image will be loaded into the quadrant in the coordinate system.
You can repeat the steps above if the edges of the captured image are still not aligned.