Snapmaker A150, Быстрый старт

Страница: 35 / 41

62
|
Quick Start Guide
|
63
CNC Carving
03
/03
Attach the CNC Carving Platform to the Platform.
M4 x 10 Hex Socket Head Screw x 4
CNC Carving Platform x 1
1:1
5.1.2 Initial Setup
Guides & Pictures / Snapmaker
Plug the AC Power Cable into an electrical outlet. Switch the power on and follow the prompts on the
touchscreen: Read the Terms -> Name the Machine -> Connect to a Wi-Fi Network.
It is recommended to wait for 5 seconds when you turn your machine off and on again.
Please skip this step if you
have completed the initial
setup. If you need to change
the settings above, swipe
left on the home page of
the touchscreen -> select
Settings -> tap Wi-Fi or
About Machine as needed.
The initial guide, which
helps you get started, will
appear only once. If you
need to launch it again,
swipe left on the home page
of the touchscreen -> select
Settings -> tap Guides .