Snapmaker A150, Быстрый старт

Страница: 22 / 41

36
|
Quick Start Guide
|
37
3D Printing
2. Tap Start on the Load Filament screen. After the temperature reaches the target temperature, tap Load and
then gently push the filament into the 3D printing module until you can feel the motor pulling the filament in.
3. Clean the nozzle using the tweezer, then tap Done .
You can change the target Nozzle Temp by sliding the scale bar.
If there is no filament coming out of the nozzle, do not tap Done until you repeat the steps
above and the filament extrudes successfully.
When you need to change the filament, select Controls and Nozzle . After the
temperature reaches the target temperature, tap Unload and pull the filament out
of the module.
Congratulations!
You are now ready to print. Please continue to
generate the G-code file.