MENTOR 12 USER’S MANUAL
SECTION 3: ADVANCED CONTROL – Page 53
There is also another button on the configuration screen,
called TRIP, which enables you to establish the TRIP
condition depending on the digital inputs chosen for this.
This is done in the same way as explained in Basic Control
(See Basic Control, selection of timer start and stop
conditions).
Configuration
In short, the following fields must be filled in, in order to
correctly configure a fault:
•
Green button marked Pre-Fault provides access to
its configuration screen.
•
Red button marked Fault provides access to its
configuration screen.
•
Blue button marked Post-Fault provides access to
its configuration screen.
•
White button marked TRIP provides access to the
configuration screen of the trip signal.
•
Blue window on the pre-fault area of the graphic:
you must enter the duration of the pre-fault in
milliseconds, clicking on this and using the digit
adjustment selection arrows and the rotary knob.
•
Blue window on the Fault area of the graphic: you must enter the maximum
duration of the fault in milliseconds, clicking on this and using the digit
adjustment selection arrows and the rotary knob.
