Function
Setting Items
TB: Teaching box PC: Controller setting software
: Can be set from TB Ver. 2.
**
(The version information is displayed on the initial screen.)
Item
Step data input type
JXC5H/6H
Step data and parameter setting
• Input from controller setting software (PC)
• Input from teaching box
Step data “position” setting
• Numerical value input from controller setting
software (PC) or teaching box
• Input numerical value
• Direct teaching
• JOG teaching
Number of step data
64 points
Operation command (I/O signal)
Step No. [IN
*
] input
⇒
[DRIVE] input
Completion signal
[INP] output
Item
Contents
Easy
Mode
Normal
Mode
Step data
input type
JXC5H/6H
TB PC
TB/PC
Step data
setting
(Excerpt)
Movement MOD
Selection of “absolute position” and “relative position”
V
V
Set at ABS/INC
Speed
Transfer speed
V
V
V
Set in units of 1 mm/s
Position
[Position]: Target position
[Pushing]: Pushing start position
V
V
V
Set in units of 0.01 mm
Acceleration/Deceleration
Acceleration/deceleration during movement
V
V
V
Set in units of 1 mm/s
2
Pushing force
Rate of force during pushing operation
V
V
V
Set in units of 1%
Trigger LV
Target force during pushing operation
V
V
Set in units of 1%
Pushing speed
Speed during pushing operation
V
V
Set in units of 1 mm/s
Moving force
Force during positioning operation
V
V
Set to 100%
Area output
Conditions for area output signal to turn ON
V
V
Set in units of 0.01 mm
In position
[Position]: Width to the target position
[Pushing]: How much it moves during pushing
V
V
Set to 0.5 mm or more
(Units: 0.01 mm)
Parameter
setting
(Excerpt)
Stroke (+)
+ side position limit
V
Set in units of 0.01 mm
Stroke (−)
− side position limit
V
Set in units of 0.01 mm
ORIG direction
Direction of the return to origin can be set.
V
Compatible
ORIG speed
Speed during return to origin
V
Set in units of 1 mm/s
ORIG ACC
Acceleration during return to origin
V
Set in units of 1 mm/s
2
Test
JOG
V
V
V
Continuous operation at the set
speed can be tested while the
switch is being pressed.
MOVE
V
V
Operation at the set distance and speed from
the current position can be tested.
Return to ORIG
V
V
V
Compatible
Test drive
Operation of the specified step data
V
V
V
(Continuous operation)
Compatible
Forced output
ON/OFF of the output terminal can be tested.
V
Compatible
Monitor
DRV mon
Current position, speed, force, and the speci-
fied step data can be monitored.
V
V
V
Compatible
In/Out mon
Current ON/OFF status of the input and output
terminal can be monitored.
V
Compatible
ALM
Status
Alarm currently being generated can be confirmed.
V
V
V
Compatible
ALM Log record
Alarms generated in the past can be confirmed.
V
Compatible
File
Save/Load
Step data and parameters can be saved, for-
warded, and deleted.
V
Compatible
Other
Language
Can be changed to Japanese or English
V
V
V
Compatible
5
Controllers
JXC
m
Series
