-39-
7.3.2 PROFINET Communication setting
The PROFINET communication settings and startup are shown below.
For details, refer to "LECSN-T Instruction Manual, Section 20.1
”.
(1)
Connection with the upper side
Set up the upper side following the manual of the upper side used. For the setup, the General Station
Description (GSD) file listing the information about the communication setting of devices is available. Install
the EDS file to a configuration tool to be used. Refer to the manual of each configuration tool for how to use
the GSD file.
Please install the GSD file from the following link (SMC website).
https://www.smcworld.com/assets/manual/other/files/LECSNx-Tx-P_GSD.zip
(2) Station name
This is used for identifying of driver from the upper side. Set up the upper side following the manual of the
upper side used.
(3) IP address setting
Set an IP address using the "AnybusIPconfig tool” offered, axis selection rotary switch (SW2/SW3) on the
display of the driver, and upper side. Change the IP address with the axis selection rotary switch
(SW2/SW3) before powering on the driver. When you set it with automatic setting of the upper side, the
upper side setting will be prioritized. The IP address you set can be checked with the "AnybusIPco
nfig tool”
or system configuration window of setup software (MR Configurator2
TM
).
"AnybusIPconfig tool” can be downloaded from the following link (SMC website).
https://www.smcworld.com/assets/manual/other/files/IPConfigTool.zip
You can set an IP address as follows.
Axis selection rotary switch
(SW2/SW3)
IP address setting value
00h
An IP address set by the "AnybusIPconfig" tool is used.
01h to FEh
Although an IP address set by the "AnybusIPconfig" tool is used, the fourth octet value is replaced
with a value set with the axis selection rotary switch (SW2/SW3). The DHCP function is disabled.
Set a hexadecimal value with the axis selection rotary switch (SW2/SW3). The hexadecimal value
is converted into a decimal value and set as the fourth octet of the IP address.
FFh
The DHCP function is enabled.
