Doc. no.IZ
＊
-OMV0005
8
1) Perform maintenance regularly and clean the emitters.
Periodically inspect the electrostatic sensor to check if it is
operated under faulty conditions. The maintenance must be
carried out by an operator who has sufficient knowledge and
experience.
The emitter must be cleaned when the maintenance
display (NDL) LED is ON.
If the product is used for an extended period of time with
dust present on the emitters, the product’s ability to eliminate
static electricity will be reduced. The energy saving nozzle is
more susceptible to the environment than either the high flow
rate nozzle or the female threads for piping because it uses
the surrounding air; dust will collect on the emitter more
easily.
If the emitter becomes worn and the product's ability to
eliminate static electricity is not restored after cleaning, replace the emitter assembly.
2) The air tube and fitting must be handled as a consumable part.
The tube and fitting that are connected to the female threads for piping can deteriorate due to ozone and
need to be replaced regularly, or provide protection against ozone.
3) Cleaning or replacing the emitters should never be performed while the power supply or compressed
air supply are ON.
If the emitters are touched while the product is energized, this may cause an electric shock or accident.
If the cartridge assembly is removed while compressed air is supplied, the cartridge assembly will shoot out.
If cartridges are not securely mounted to the bar, they may eject or release when compressed air is supplied to the
product.
4) Do not disassemble or modify the product.
Disassembling or modifying the product may cause product, electric shock or fire. The product will not be
guaranteed if it is disassembled and/or modified.
5) Do not operate the product with wet hands.
Never operate the product with wet hands. It may cause electric shock or other accidents.
1) Do not drop, hit or apply excessive shock (100m/s
2
or more) to the product during handling.
The inner parts may be damaged leading to malfunction even if there is no visible external damage.
2) Take care during mounting and removal of the connector.
When the power cable is connected or disconnected, pinch the connector claw together and insert or
remove the plug directly in line. If connected or disconnected in an inappropriate direction, the modular jack
may be damaged and cause operation failure.
Maintenance
Warning
Caution
This product contains a high voltage
generation circuit. When performing
maintenance inspection, be sure to
confirm that the power supply to the
ionizer is turned off. Never disassemble
or modify the product, as this can cause
loss of product functionality, and there is
also a risk of electric shock and earth
leakage.
Danger High Voltage
