Doc. no.IZ
＊
-OMV0005
14
3-1-2. Ionizer Body Installation
1) Installation of the energy saving nozzle
The energy saving nozzle uses external air via the external air inlet.
The external air inlets are located in part A and part B (shown below). When an energy saving nozzle is
used, do not cover the external air inlets. If the external air flow is blocked, product performance will
decrease.
2) Installation without bracket
If a bracket is not used, install the product using either the through holes or tapped holes.
When installing the product, use M3 hexagon socket head cap screws. (The screws should be prepared by
the user).
Referring to the figure below, affix the product using screws of optimum length.
M3 screw recommended tightening torque is 0.61 to 0.63 Nm.
Top through-hole mounting Bottom tapped-hole mounting
3) Installation with bracket
There are 3 types of bracket available (L-shaped bracket, Pivoting bracket, and DIN rail mounting bracket)
(1) L-bracket
The L-bracket can be mounted in 4 different ways as shown below.
Outward mounting
Inward mounting
P
iv
ot
m
ounti
ng
Fi
x
ed
m
ou
nt
in
g
Use a screw with a length of 12 mm more than.
Use a screw with maximum screw-in depth
of 10 mm
1
0
m
m
o
r
le
s
s
1
2
mm
Part A
Part B
