Doc. no.IZ
＊
-OMV0005
16
(3) DIN rail mounting bracket
a. Angle adjustment of the DIN rail mounting bracket
The DIN rail mounting bracket angle is adjustable.
Tighten the threads A after adjusting the angle.
Tightening torque: 0.61 to 0.63 Nm
b. Mounting of the product to the bracket
If angle adjustment is required after fixing the
product, use the elongated holes in the bracket. If it
will not be required use the round holes.
For mounting the product to the bracket, mount
the L-bracket using the hexagon socket head cap
screws (M3 x 6) and flat washers included with
bracket.
Refer to "Dimensions" section for details.
Tightening torque: 0.61 to 0.63 Nm
c. Fixing to the DIN rail
Place the DIN rail in the groove B and tighten the
hexagon socket head cap screw.
Tightening torque: 0.61 to 0.63 Nm
4) Manifold mounting
The spacers packed together with the parts set must be used for assembly. Their purpose is to create a
common ground connection.
Refer to the drawing below for assembling (when 3pcs. are connected).
Tightening torque: 0.61 to 0.63 Nm
A
B
Round holes
Hexagon socket head cap screw
Spacer
Fixing hexagon socket
head cap screw M3
L-bracket, or
DIN rail mounting bracket
Step 1
Step 2
Elongated holes
