manualshive.com logo in svg

SMC Networks ISE30A Series, Руководство по эксплуатации

Поделиться
Скачать
SMC Networks ISE30A Series Скачать руководство пользователя страница 5

 

-4- 

 

No.PS##-OML0003-B 

 

 

Operator 

♦

This operation manual is intended for those who have knowledge of machinery using pneumatic 
equipment, and have sufficient knowledge of assembly, operation and maintenance of such 
equipment. Only those persons are allowed to perform assembly, operation and maintenance. 

♦

Read and understand this operation manual carefully before assembling, operating or providing 
maintenance to the product. 

 

■

Safety Instructions 

Warning 

■

Do not disassemble, modify (including changing the printed circuit board) or repair. 

An injury or failure can result. 

■

Do not operate the product outside of the specifications. 

Do not use for flammable or harmful fluids. 
Fire, malfunction, or damage to the product can result. 
Verify the specifications before use.

 

■

Do not operate in an atmosphere containing flammable or explosive gases. 

Fire or an explosion can result. 
This product is not designed to be explosion proof.

 

■

Do not use the product in a place where static electricity is a problem. 

Otherwise it can cause failure or malfunction of the system. 

■

If using the product in an interlocking circuit: 

•

Provide a double interlocking system, for example a mechanical system 

•

Check the product regularly for proper operation 

Otherwise malfunction can result, causing an accident. 

■

The following instructions must be followed during maintenance: 

•

Turn off the power supply 

•

Stop the air supply, exhaust the residual pressure and verify that the air is released before performing 

maintenance 

Otherwise an injury can result. 

Caution 

■

Do not touch the terminals and connectors while the power is on. 

Otherwise electric shock, malfunction or damage to the product can result. 

■

After maintenance is complete, perform appropriate functional inspections and leak tests. 

Stop operation if the equipment does not function properly or there is a leakage of fluid. 
When leakage occurs from parts other than the piping, the product might be faulty. 
Disconnect the power supply and stop the fluid supply. 
Do not apply fluid under leaking conditions. 
Safety cannot be assured in the case of unexpected malfunction. 

Содержание ISE30A Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды