SMC Networks ISE20CH-L, Руководство по эксплуатации

Страница: 54 / 108

-53-
No.PS
※※
-OMX0002
Security code changing
Press the or button to input the changed
security code on the main display.
∗
For instructions on how to enter the security code,
refer to "How to input and change the security code"
on page
63 .
After entry, the changed security code will flash by
pressing the
button for 1 second.
(At this point, the changing of the security code is not
completed)
Return to the change of setting again by pressing the
or button.
Press the button to set. Return to function selection mode.
[F81] Security code completed
If the security code function is enabled, it is will be necessary to input a security code to release the
key-lock.
∗
: If a key is not pressed for 30 seconds while entering the security code, function selection mode will return.