SMC Networks HRS012-A*-10-*, Руководство по обслуживанию

Страница: 12 / 222

HRX-MM-N007
Chapter 1 Safety Instructions
1.6 Waste Disposal HRS Series
1-6

Check all parts and screws are fitted correctly and securely after
maintenance.

Avoid working in a drunken or sick condition, which might cause an
accident.

Do not remove the panels except for the cases permitted in this manual.

Do not remove the panels during operation.
1.6 Waste Disposal
1.6.1 Disposal of refrigerant and compressor oil
The product uses hydrofluorocarbon type refrigerant (HFC) and compressor
oil. Comply with the laws and regulations in each country for the disposal of
refrigerant and compressor oil. The type and quantity of refrigerant is
described on the 1.4.1 Product label.
If these fluids need to be recovered, read and understand the instructions
below carefully. If there is any unclear point, contact an SMC's sales
distributor.
1.6.2 Disposal of product
The disposal of the product must be handled by a specialized industrial
waste disposal agency in accordance with local laws and regulations.
1.7 Material Safety Data Sheet (MSDS)
If the material safety data sheets of chemicals used in this product are
needed, contact an SMC's sales distributor.
Any chemicals used by the user must be accompanied by an MSDS.

Only maintenance personnel or qualified people are allowed to open
the cover panels of the product.

Do not mix the compressor oil with domestic waste for disposal. Also,
the disposal of the waste must only be conducted by specific facilities
that are permitted for that purpose.

Comply with the laws and regulations in each country for the disposal
of refrigerant and compressor oil.

The release of refrigerant in to the atmosphere is banned by law.
Recover it with specific equipment and dispose of it correctly.

Only people who have sufficient knowledge and experience about the
product and its accessories are allowed to recover the refrigerant and
compressor oil.