Smartgen ALC404, Руководство пользователя

Страница: 64 / 83

ALC404 LIGHTING TOWER CONTROLLER USER MANUAL
ALC404 Lighting Tower Controller 2018-11-06 Version 1.1 Page 64 of 83
No. Type Description
69 Preheat (until end of safety on) Action in period of preheat delay to the end of safety on delay.
70 Cooling Timer In Process Action in period of cooling delay.
71 Reserved
72 System In Auto Mode Action when system is in Auto mode.
73 System In Manual Mode Action when system is in Manual mode.
74 System In Stop Mode Action when system is in stop mode.
75 Under Speed Warning
Active when the engine speed falls below the Under Speed
Warning setting
76 Under Speed Shutdown
Active when the engine speed falls below the Under Speed
Shutdown setting
77 Reserved
78 Idle Control
Action during ―cranking---start idle‖ period and ―stop idle ---
waiting for stop
‖ period.
79 Oil Pre-supply Actions in period of cranking to safety on.
80 Raise Speed Energized Action in warming up delay.
81 Excite Generator
Output in start period. If there is no generator frequency during
hi-speed running, output for 2 seconds.
82 Drop Speed Energized Action between the periods
from ―stop idle‖ to ―wait for stop‖.
83 Pre-Lubrication Output Action in period of pre-heat to safety on.
84 Reserved
85 Strobe Light
It is output between the periods from genset normal running to
stop cooling, or output when genset fail to stop.
86 Audible Warning
Action when there are 10s left from start time in auto start mode
and stop output after starting the generator.
87 Remote PC Output Control genset via PC software or remote communication.
88 Reserved Control the power supply of GSM modem.
89 Sensor 1 Open Circuit Warning
Active when the generator is warning due to sensor 1 is open
circuit
90 Sensor 1 High Warning
Active when the generator is warning due to sensor 1 is too
high.
91 Sensor 1 Low Warning Active when the generator is warning due to sensor 1 is too low.
92 Sensor 1 High Shutdown
Active when the generator is shutdown due to sensor 1 is too
high.
93 Sensor 1 Low Shutdown
Active when the generator is shutdown due to sensor 1 is too
low.
94 Sensor 2 Open Circuit Warning
Active when the generator is warning due to sensor 2 is open
circuit
95 Sensor 2 High Warning
Active when the generator is warning due to sensor 2 is too
high.
96 Sensor 2 Low Warning Active when the generator is warning due to sensor 2 is too low.
97 Sensor 2 High Shutdown
Active when the generator is shutdown due to sensor 2 is too
high.