Smartgen ALC404, Руководство пользователя

Страница: 63 / 83

ALC404 LIGHTING TOWER CONTROLLER USER MANUAL
ALC404 Lighting Tower Controller 2018-11-06 Version 1.1 Page 63 of 83
No. Type Description
45 Gen. Under Volt. Warning
Active when the voltage falls below the Under Voltage Warning
setting
46 Gen. Under Volt. Shutdown
Active when the voltage falls below the Under Voltage
Shutdown setting
47 Louver Control
Action when genset cranking and disconnect when genset
stopped completely.
48 Low Fuel Level Warning
Action when the input port set as
―Low Fuel Level Warning
Input
‖ is active and controller detects low fuel level warning
alarm; or it is action when the input port set as
―Low Fuel Level
Shutdown Input
‖ is active and controller detects low fuel level
shutdown alarm.
49 Loss of Speed Signal
Action when detected engine speed value is 0 during normal
running period.
50 ECU Stop It is suit for EFI engine with ECU to control ECU stop.
51 ECU Power It is suit for EFI engine with ECU to control ECU power supply.
52 ECU Warning It is indicate that ECU has sent a warning alarm signal.
53 ECU Shutdown It is indicate that ECU has sent a shutdown alarm signal.
54 ECU Communication Fail Shut It is indicate that ECU has failed to communicate with controller.
55
ECU High Coolant Temp.
Warning
It is output when the coolant temperature of ECU is high and
arrived at the warning limit.
56
ECU High Coolant Temp.
Shutdown
It is output when the coolant temperature of ECU is high and
arrived at the shutdown limit.
57 ECU Low Oil Pressure Warning
It is output when the oil pressure of ECU is low and arrived at
the warning limit.
58
ECU Low Oil Pressure
Shutdown
It is output when the oil pressure of ECU is low and arrived at
the shutdown limit.
59 Reserved
60 Reserved
61 Over Current Warning
Active when the current exceeds the Over Current Warning
setting
62 Over Current Shutdown
Active when the current exceeds the Over Current Shutdown
setting
63 Over Current Trip and Stop
Active when the current exceeds the Over Current Trip and
Stop setting
64 Over Speed Warning
Active when the engine speed exceeds the Over Speed
Warning setting
65 Over Speed Shutdown
Active when the engine speed exceeds the Over Speed
Shutdown setting
66 Preheat (during pre-heat timer) Action in period of preheat delay to cranking.
67 Preheat (until end of crank) Action in period of preheat delay to the end of cranking delay.
68
Preheat (until end of WARM
timer)
Action in period of preheat delay to the end of warming up
delay.